Gymrex GR-MG120 Manual De Instrucciones página 24

a) Loosen the seat adjustment knob (12) and remove it. Slide the seat bracket
(11) into the hole axis of the main frame. Adjust the working height to your
own needs, then lock it by inserting and tightening the adjustment knob.
b) Place the seat support (9) on the support (11) and lock it with the locking knob
(10).
c) Install the seat (8) on the support (9). Lock in place by tightening the seat nuts
on the sides.
CAUTION! Installation of the seat support may require the use of an
additional washer between the support and the lock knob!
STEP III