Wiring - AVARRO 0E-HDMISP2 Manual

Steps to install the device in a suitable location:
1. Remove the screws that secure the side panel to the device.
2. The bracket is attached to the enclosure as shown.
3. Repeat steps1-2 for the other side of the unit.
4. Attach the brackets to the surface you want to hold the device
against using the screws (provided by others).

Wiring

Warnings:
Before wiring, disconnect the power from the device.

During wiring, connect and disconnect the cables gently.

Steps for device installation:
1. Connect an HDMI source (such as Blu-ray player, games console,
STB, Apple TV etc.) to the HDMI IN port of the splitter via an HDMI
cable.
2. Connect HDMI displays to HDMI OUT.
3. Connect the power adapter provided to the unit.
4. Power on all attached devices.
For more information please call 1-833-574-9124 or email AVARRO@adiglobal.com
6
··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us