Assembly - ARGENTO Alpha Manual De Instrucciones

5. Assembly

Carefully remove the bike from the packaging* and remove the protective material taking care not to damage the relevant
aesthetic parts or force the cables and pre-assembled components.
*The bike must be removed from the packaging by two adults to ensure that it is not damaged and avoid the risk of injury and/
or crushing.
Handlebar installation
Rotate the fork until it is positioned in front of the frame.
Check that the handlebar attachment is positioned frontally and aligned with the frame while waiting for any subsequent
adjustment necessary following installation of the handlebar and insertion of the front wheel.
Remove the fastening screws of the front panel on the end of the handlebar attachment and insert the handlebar into the
appropriate housing in the central position; position the front panel of the previously removed handlebar attachment in its
original position and slightly tighten the fastening screws to adjust the correct positioning of the handlebar. Complete the
operation by tightening the screws.
11