Important; Polarized Plug - Vacmaster VOM205P Manual Del Usuario

8. Place the power head back on the collection tank aligning the top section with the latches, and
snap into place (Fig. 9 & 10).
9. Insert the larger end of the hose into the vacuum port on the collection tank and lock into place
(Fig. 11).
10. Choose the desired attachment and insert onto the end of the hose (Fig. 12).
For your convenience this vacuum comes with a wall mount bracket for storage.

IMPORTANT!

• Do not mount the bracket over 5 ft / 1.5 m from the floor.
• Do not screw the wall mount bracket to drywall only. Secure the screws to a stud.
• Do not hang from or sit on the vacuum when on wall mount bracket.
• Do not use the vacuum while it is mounted on the wall mount bracket.
• Empty the collection tank before mounting the vacuum on the wall.
11. Make sure the bracket is level and mark the hole locations. Make1/8-inch diameter pilot hole in
each marked location. Align the two screw holes so that they are over a stud and secure the
wall mount bracket to the wall stud with the two screws provided (Fig. 13).
12. Place the wet and dry vacuum cleaner into the wall mount bracket (Fig. 14).

POLARIZED PLUG

To reduce the risk of electrical shock, this appliance has a polarized plug (one blade wider than the
other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way. Double insulation
grounded power cord and grounded power supply system.
eliminates the need for the three wire
8