Battery - ARGENTO Piuma Manual Del Usuario

The electrically power assisted cycle starts and powers its electrical and electronic functions through the lithium-ion battery
supplied with the product, correctly recharged, installed and, if provided, following activation through a specific switch.
A. Battery activation switch (I = On / O = Off) * if provided
B. Charging port for battery charger
C. Battery lock/unlock mechanism
D.Residual battery charge indicator. ** side or front location
Battery removal and insertion
The battery can be removed from the bike to prevent theft, for charging or to be stored in optimal conditions.
Removing the battery:
Insert the key supplied in the lock on the battery. Turn the key counterclockwise to the unlocking position. Remove the battery
from its slot on the frame stem tube sliding it upwards and outwards until it has been completely removed.
Inserting the battery:
Insert the key supplied in the lock on the battery. Turn the key counterclockwise to the unlocking position. Insert the battery in
its slot on the frame stem tube and complete the installation by turning the key clockwise until it is locked.
Check that the battery is correctly installed and secured by trying to pull it out and/or making sure that it is securely fastened
to the frame and does not move.
Battery charging
Before using the electrically power assisted cycle for the first time, the battery must be fully charged using the battery charger
supplied.
The average time battery charging time is between approximately 4 and 6 hours, depending on the residual charge of the

battery.

We recommend charging the battery with the specific battery charger after each use of the electrically power assisted
cycle.
CAUTION
Only use the battery charger provided or an approved model with the same technical specifications, taking care to observe
the same methods and precautions of use indicated on the charged or in the manual.
EPAC
Piuma
Piuma-S
Battery charger INPUT
AC 100V-240V 1.8A (Max)
AC 100V-240V 1.8A (Max)
7. Battery
Battery charger OUTPUT
DC 42V 2.0A (Max)
DC 42V 2.0A (Max)
21