Belkin OmniView 5216K Guía De Instalación Rápida página 3

Step 1
The OmniView IP Switch includes adjustable mounting brackets ideal for installation in
19-inch racks. The mounting brackets feature three adjustment positions to allow you to
set the Switch's face flush with the ends of the rails or to extend the Switch past the front
of the rails. Please follow these simple steps to achieve the desired adjustment.
1.1
Determine how far you would like the Switch to protrude from the rack. Select a
bracket-hole scheme.
1.2
Attach the bracket to the side of the Switch using the Phillips screws provided.
(Refer to diagram below.)
Mount the Switch
3