Maintenance And Cleaning; Disposal; Warranty And Service; Warranty - LIVARNO home 14160605L Instrucciones De Montaje, De Uso Y De Seguridad

Maintenance and cleaning / Disposal / Warranty and service
Use a clean, dry, lint-free cloth when replacing
the light bulb .
14
Model 14160605L / 14160606L:
Remove the lamp head
by loosening the fixing screws
4
Remove the defective light bulb
ing it anticlockwise from the bulb socket.
Insert a new light bulb
and tighten by turning it clockwise (see Fig. I).
Be sure that it is positioned correctly.
Secure the lamp head
by tightening the fixing screws
Model 14160705L:
Remove the lamp body
by loosening the fixing screws
13
Remove the defective light bulb
ing it anticlockwise from the bulb socket.
Insert a new light bulb
and tighten by turning it clockwise (see Fig. I).
Be sure that it is positioned correctly.
Secure the lamp body
13 by tightening the fixing screws 12.
All models:
Reinstall the fuse or switch on the circuit breaker
in the fuse box (I setting) (see Fig. H).
Your lamp is now ready to use.

Maintenance and cleaning

Switch the lamp off.
DANGER OF ELECTRIC
SHOCK!
Disconnect the light from the power supply
before cleaning. To do this, remove the fuse
or switch off the circuit breaker in the fuse box
(0 setting) (see Fig. A).
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
First, allow the lamp to cool down completely.
DANGER OF ELECTRIC
SHOCK!
18 GB/IE
from the lamp body
13
.
12
by unscrew-
14
into the bulb socket
14
on the lamp body
13 4
.
12
from the lamp head
4
.
12
by unscrew-
14
into the bulb socket
14
on the lamp head
4
For electrical safety reasons, never clean the
lamp with water or other liquids, or immerse it
in water.
Do not use solvents, petrol, etc. These would
damage the light.
Only use a dry, lint-free cloth for cleaning.
Reinstall the fuse or switch on the circuit
breaker in the fuse box (I setting) (see Fig. H).

Disposal

The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.

Warranty and service

Warranty

You receive a 36 month warranty on this product,
valid from the date of purchase. The appliance has
been carefully produced under strict quality control.
Within the warranty period we shall rectify without
charge all material and manufacturing defects. In
the event of a defect during the warranty period,