Cleaning Instructions; Before Using For The Fi Rst Time; After Each Use - Medela Harmony 67186S Instrucciones De Uso

1. Cleaning
1.1 Before using for the fi rst time
Clean and sanitize the parts below
before using your pump for the fi rst time.
WARNING: To avoid health risk and
reduce the risk of injury: Kit contents
are sterile unless the package has been
damaged. The packaging should be
inspected for holes, tears, broken seals,
etc. If the sterile packaging is damaged,
the contents must be cleaned prior to use
(refer to cleaning instructions). Follow the
cleaning and sanitizing instructions in
Sections 1.2 (start at step 4) and 1.3
that follow.
• Handle, Diaphragm,
Stem, O-Ring
Assembly
• White membrane
• Breastmilk bottle
and lid
Caution
• Only use drinking-quality tap or bottled
water for cleaning.
• Take apart and wash all parts that
come in contact with the breast and
breastmilk immediately after use to
avoid dry up of milk residues and to
prevent growth of bacteria.
6
• Pump Body
• Yellow valve
• Breastshield

1.2 After each use

Clean all parts that come in contact
with your breast and breastmilk.
See image in Section 1.1.
1
Separate breastshield from
pump body.
4
Rinse in cool water all separated
parts that came in contact with
breast and breastmilk in order to
remove breastmilk residue.