Hqsound Processor Quick Start Notice; Before You Start - Worldcast Systems HQSound PROCESSOR Guía Rápida

English version
HQSound PROCESSOR
Quick start notice

1. Before you start

Make sure the following accessories are included in the box:
 1 power supply cable,
 1 network cable
 1 external audio cable (see appendix D for cable diagram)
 1 box including 1 CD-Rom, 1 quick start, 1 I/O configuration notice, 1 sticker: #2 for a 2-band
HQSound PROCESSOR or #4 for a 4-band HQSound PROCESSOR, 1 quality control form.
2. Connecting and starting the unit
set
Network cable
UECP COM Ports
1. Connect the inputs. By default the AES input has priority over the analog input; if the analog input is
the only one to be connected, it will be taken into account. Please see the HQSound PROCESSOR
Sound Process manual for more information about input management.
2. Connect to power using the provided cable.
4
Headphone output
or sticker on front panel
SCA TX 2
output
USB Port if modem connection
(with USB-serial converter)
Status LEDs *
External audio cable Digital inputs (option)
TX 1
For future use
output
Connect to power
Relay outputs (option)