Periodic Maintenance; Putting Out Of Service And Demolition - battioni Pagani FAN 420 Manual De Instrucciones De Uso Y Mantenimiento

11.5 - PERIODIC MAINTENANCE

SERVICING TO BE CARRIED OUT
Check oil circulation
Check oil level in tank
Check wear of blades
Check correct operation of the
overpressure and vacuum regulation valves
Wash oil tank
Wash body internally
Wash lubrication pump
Check that the overflow valves are working
correctly
Wash and clean the valves
Wash and blow the filter cartridge
Wash Ballast valve filter

12 - PUTTING OUT OF SERVICE AND DEMOLITION

Before demolishing the Rotary blades vacuum pump the following materials should be separated:
• lubricating oil;
• parts in rubber and plastic;
• parts in cast iron and steel;
and disposed of correctly.
Do not discard the Rotary blades vacuum pump in the environment.
For disposal of the lubricating oil make use of specialised treatment services.
page 44
HOW TO PROCEED
Inspect the level sight glasses
Use the oil level on outside of tank
Remove threaded plug
Remove valves
Remove tank
Put in oil + diesel oil (after washing
lubricate with oil only)
Use a brush and compressed air
Remove valves
Remove valves
Remove the filter cartridge.
Dismantle the filter
Setting the pace since 1953
FREQUENCY
Once a day
Once a week
Every 300 working hours:
Once a month
Once a year
Whenever sewage enters or when
inactive for a long time
Once a year or for prolonged
inactivity
Once a month
Once a month
Once a week
Once a month