Cleaning / Checking The Control Unit; Wipe Disinfecting; Checking; Cleaning / Checking The Foot Control - NSK Primado2 Manual Del Usuario

Cleaning / Checking the Control Unit

4
4 – 1 Wipe Disinfecting
Wipe the product using a cloth moistened with alcohol disinfectant (e.g. Meliseptol
● Do not soak the Control Unit in water.
● Prevent water from entering the Connector portion.
● Do not sterilize the Control Unit.
4 – 2 Checking
Check with the same procedure described in "Check before Operation (Control Unit)".
Proceed to Storage (see "11 Storage")
● To perform "Check before Operation (Control Unit)", refer to OM-SE0021E Primado2 OPERATION MANUAL Control Unit and Foot
Controls.

Cleaning / Checking the Foot Control

5
5 – 1 Cleaning/Wipe Disinfecting
1 Wipe the product using a cloth moistened with neutral
enzymatic detergent.
2 Remove the detergent using a cloth moistened with water.
● Do not soak the Foot Control into water.
● Prevent water from entering the Connector portion.
● Do not sterilize the Foot Control.
5 – 2 Checking
Check with the same procedure described in "Check before Operation (Foot Control)".
Proceed to Storage (see "11 Storage")
● To perform "Check before Operation (Foot Control)", refer to OM-SE0021E Primado2 OPERATION MANUAL Control Unit and Foot
Controls.
rapid).
®
CAUTION
NOTICE
3 Wipe the product using a cloth moistened with alcohol
disinfectant (e.g. Meliseptol
CAUTION
NOTICE
7
rapid).
®