Motion Detection - Blaupunkt VIO-B40 Guia De Inicio Rapido

3. Learn in a Camera
Step 1:
Download and install the "Cam4Home Plus" APP to
your smartphone from the App Stores.
Step 2:
Connect your smartphone to your Wi-Fi network.
NOTE: If you are using a dual-band router, make sure that your smartphone is
connected to a 2.4 GHz WiFi Network and not to a 5GHz Wifi Network. To learn
more about this please check your router manual.
Step 3:
Open the "Cam4Home Plus" APP. Create a user account by pressing the
"sign up" button located at the bottom left hand side.
Step 4: To add a new camera tap the "+" button at the top right of the screen and
scan the QR code of the camera (refer to chapter 2 product description). Then follow the
instructions on the App to complete the camera registration.
NOTE: If you encounter any problem during the registration, check Chapter 5
4. Cam4Home Plus Management
Camera dashboard:
Tap on your camera under the main "device" menu. This will bring you to the camera
dashboard, where you can see the camera live stream video.
Camera settings:
To access the camera settings go to the camera dasboard and tap the
at the top right.
Push notifications
On the device menu tap the 3 dot
Tap the "Alarm Notification" button to activate / deactivate the push notifications.
Important: Ensure that you have given permission to show pop up notifications on your
smartphone permission settings.

Motion detection

To enable / disable motion detection go to: Camera dashboard --> Settings icon --> Arm
settings --> Motion detection. Note: Motion detection is enabled by default.
Video Storage
To storage video recordings the camera needs to have a Micro-SD card installed (see
chapter 5.1) or a Cloud Storage Plan activated.
NOTE: To receive push notifications "Motion detection" must be enabled.
6
icon and select "Alarm Notifications"
settings icon
.