benza ER-45 Instrucciones De Uso Y Mantenimiento página 39

4º.- START THE ENGINE IN THE FOLLOWING MANNER AFTER COMPLETING PREVIOUS
STEPS
If engine is cold:If engine is cold:
Using your right hand, grasp the handle of the starting rope (Fig. 6) and pull lightly until
compressing the engine. Without releasing the handle, allow the rope to recoil and pull
strongly.
Once the engine has exploded several times, set the air control to the "open" position
and pull the rope again.
NOTE: Do not release the handle until it has slowly returned to its place to prevent
damage to the start assembly.
Once the engine is started, allow a few seconds until it warms up before starting
operation.
If the engine is hot:
It will only be necessary to press the engine safety stop handle and pull the starting rope.
• ENGINE STOP
Release the safety stop handle (page 34, Fig. 6) and the engine will immediately stop.
All manuals and user guides at all-guides.com
HANDLE
STARTING
ROPE
(fig. 7)
35
ENGLISH