Hama 223616 Instrucciones De Uso página 4

G Operating instruction
Thank you for choosing this
Hama product!
Take your time and read the following instructions
and information completely.
Please keep these instructions in a safe place for
future reference.
1. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching uninsulated product parts that may carry
hazardous voltage.
Warning
This symbol is used to indicate safety instructions
or to draw your attention to speci c hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package contents
• Universal switching power supply unit
• 2 jack plugs: 3.5 / 2.5 mm
• 5 DC plugs: 1.35x3.5 / 1.7x4.0 / 1.5x5.5 / 2.1x5.0
/ 2.5x5.5
• Adjusting key
• These operating instructions
3. Safety instructions
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Do not drop the product and do not expose it to
any major shocks.
• Do not operate the product outside the power
limits given in the speci cations.
• Do not modify the device in any way. Doing so
voids the warranty.
• Do not continue to operate the product if it is
visibly damaged.
• Use the product only for the intended purpose.
• As with all electrical products, this device should
be kept out of the reach of children.
• Do not use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
• Route all cables so there is no risk of tripping.
• Do not bend or crush the cable.
• Always pull directly on the plug when
disconnecting the cable, never on the cable itself.
• If the contact pins of the plug components
2
are damaged, the power supply plug must be
discarded.
• Dispose of packaging material immediately in
accordance with the locally applicable regulations.
• The product is intended only for use inside
buildings.
• Only use the article under moderate climatic
conditions.
• Do not use the product in areas in which electronic
products are not permitted.
• Do not use the product in a damp environment
and avoid splashing water.
Risk of electric shock
• Do not open the device or continue to operate
it if it becomes damaged.
• Do not use the product if the
AC adapter, the adapter cable or the mains
cable are damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
quali ed experts.
4. Operation
Note - mains voltage 100 - 240 V
The charger is suitable for mains voltages of
100 - 240 V and therefore can be used worldwide.
Please note that a country-speci c adapter may
be necessary.
Warning - connecting devices
• Before connecting a device, check whether it
can be adequately supplied with the charger's
current capacity.
• Check whether the device intended for
mains operation is compatible with the pin
assignment of the universal power supply unit.
If necessary, ask the dealer who supplied your
terminal device or contact your terminal device
manufacturer's support service.
• Note the instructions in your device's operating
manual.