Venga TKG HC 3000 Manual De Instrucciones página 5

As soon as the charging is finished, Take the adaptor out from the power socket
l
and take the plug out from the product
Don't charge the product if the room temperature is higher than 40 or lower
l
than 0.
CUTTING HEAD CLEANING & MAINTENANCE
Add the oil into the cutter head before use. (Check the left picture for reference) The
product body may be a little hot when using or charging. But it will not affect its
performance.
Positions to add oil (one drip to each of the 3 positions)
Don't use petrol or alcohol to clean the product. Otherwise, the product color
l
may be altered..
Use diluted soap water to clean the product.
l
Clean the left hairs in cutting head Put a drip of oil to each circles
5 TKG HC 3000