Technical Specification - Rapid BHX50 Manual De Instrucciones

BHX50 BATTERY TYING MACHINE
Original instructions
TOOL PARTS DESCRIPTION
A. Tying machine
A1. Guiding hook
A2. Tie pressing plate
A3. Twisting wheel
A4. LED light
A5. Trigger
A6. Feeding tray
A7. Spool
A8. Elastic strap
A9. Twist selector- minus
A10. Display screen
A11. Twist selector- plus
A12. Power button
A13. Lubrication
B. Lithium Battery
B1. Battery release button
B2. Battery input connector
C. Battery charger
C1. Power input connector
C2. Charger LED light indicator
C3. Charging jack
D. Scissors
E2. Battery charging
F. Symbols
F1. Please read through all safety warnings and
instructions carefully.
F2. Battery can only be charged indoors
F3. Double insulation; grounding not required.
F4. Fail-safe transformer charger.
F5. Battery charging will automatically cut off when
overheating occurs.
F6. Do not use or expose the tying machine in rainy
conditions.
F7. Electrical equipment cannot be disposed of
with household waste.
F8. Never touch charged objects with electric scis-
sors.
F9. Wear eye and ear protection.
F10. Wear protective gloves.
F11. Warning symbol, with information about perso-
nal injury
INTRODUCTION
This tool is intended for tying vine shoots in vineyards
with a maximum diameter of 25mm.
The tying machine should be used only for the intend-
ed purposes.
If this tool is used for other unapproved purposes,
it may cause damage to the tool and cause harm to
the user.
This tool shall only be used by adults or by young
people under the supervision of adults.
The operator or the user shall assume full responsibil-
BHX50–BATTERY Tying machine_Manual_20220901.indd 7 BHX50–BATTERY Tying machine_Manual_20220901.indd 7
ity for any harm to others or any damage to property
caused by any accident occuring during use.
The manufacturer shall not be liable for any damage
caused by non normal or improper use.

TECHNICAL SPECIFICATION

Battery binding machine, model number
Roll type
Magazine capacity, max
Max tying capacity
Tool dimensions H x W x L
Weight
Battery model, type, voltage Detachable model KH-B1A16BX, Li-Ion, 14.4V
Battery capacity, power, max power
Battery charging conditions
Battery storage conditions
Battery charger
Charging time
Ties per charge, max
Tying speed, max continuous
Operation conditions
GENERAL POWER TOOLS SAFETY WARNINGS
WARNING!! Read all safety
warnings, instructions, illus-
trations and specifications
provided with this power
tool.
Failure to follow all instructions
listed below may result in elec-
tric shock, fire and/or serious
personal injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-ope-
rated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep your work area clean and well lit. Clut-
tered benches and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
BHX50
Paper tie or Plastic tie
100 m
25 mm
240 x 75 x 310 mm
1.065 kg (incl. battery)
2500 mAh, 30W, 50W
+4°C to +40°C
-20°C to +50°C
100-240V A.C, 50-60Hz, 0.5A input
16.8V D.C, 1.42A, terminals for two
batteries, sequence charging
120 minutes/each battery
≈ 9000 ties
12 ties/ min
+4°C to +40°C
7
5/9/22 9:36 a. m. 5/9/22 9:36 a. m.