Starting The Cleaner - sunjoe 24V-PP350-LTE-P1 Manual Del Operador

Fig. 6
Siphon hose adapter
Garden hose adapter
Garden hose
2. Attach the other end of the garden hose to water supply
(Fig. 7).
Fig. 7
Connect to water supply
Garden hose
m
WARNING!
Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
m
WARNING!
Water that has flowed through back flow
preventers is considered to be non-potable.
Operation

Starting the Cleaner

1. Make sure the power cleaner is connected with proper
water source. Slide the battery in the battery compartment
until it clicks to lock it into position. Close the battery
compartment cover (Fig. 8).
Fig. 8
Battery
compartment
cover
Battery
2. If connected with a spigot, turn the water supply tap on
completely.
3. Push the safety lock on the spray gun handle, with the
safety lock pressed, engage the trigger for a few seconds
until the water flow is steady (Fig. 9).
Fig. 9
Using the Multi-spray Nozzle
Before beginning any cleaning task, determine the best spray
setting for the job. The multi-spray nozzle has 5 different spray
patterns: shower pattern (for plant watering), 40˚ (for gentle
cleaning), 25˚ (for all-purpose cleaning), 0+ (for tough jobs), and
0˚ (for spot cleaning or hard-to-reach areas) .
m
CAUTION!
NEVER change spray pattern without
stopping the power cleaner and the battery removed.
m
WARNING!
High-pressure jets can be dangerous if
subject to misuse. The jet must not be directed at persons,
pets, live electrical equipment, or the appliance itself.
To change the spray pattern:
1. Turn off the power cleaner, remove the battery.
10
Safety lock
button
On/Off trigger