sunjoe 24V-PP350-LTE-P1 Manual Del Operador página 11

2. Select the right spray pattern for the job (Fig. 10).
Fig. 10
I) The 0º intense-jet spray pattern is an extremely
powerful nozzle that delivers a high-pressure, pencil-
point jet stream. It is used to cut heavy dirt deposits
in a small, concentrated area. It is ideal for dissolving
stubborn substances, like tar and grease spots on
concrete, or for removing caked mud from equipment.
Use this pattern to clean hard-to-reach areas including
the facades of 2-story buildings or the undersides of
lawn mowers and tractors.
NOTE: Care should be used when choosing the right
spray pattern to avoid permanently gouging wood or
damaging fragile surfaces.
II) Use the 0+ spray pattern for intense cleaning jobs on
hard surfaces. Applications include stripping paint,
removing oil stains, grease, heavy mildew stains, and
rust from steel. This pattern should only be used in
areas that can withstand the high-pressure from this
pattern.
III) Use the 25º fan-tip spray pattern to clean home siding,
brick patios, wood decks, driveways, or sidewalks.
When using this spray pattern, test a small area first to
avoid surface damage.
IV) Use the 40º wide-spray spray pattern to clean items
such as cars, trucks, boats, patio furniture, or lawn
equipment.
V) Use the showering spray pattern for some light
cleaning and watering plants.
3. Twist the nozzle collar to align the symbol of the desired
spray pattern with the mark on the nozzle (Fig. 11).
Fig. 11 Align with the mark
4. Insert the battery and start the machine. Start at the top
of the area to be rinsed and work your way down, making
sure to overlap your strokes.
Using the Feather Bristle
Utility Brush Attachment
The equipped feather bristle utility brush attachment safely
cleans painted, topcoat, and delicate surfaces. Follow the
instructions below to assemble the brush attachment.
1. Remove the wand connected to the power cleaner by
pushing the wand firmly inward and rotating it counter-
clockwise at the same time, and then pull out from the
cleaner (Fig. 12).
Fig. 12
Push inward and rotate
Pull out
2. Take the utility brush and align the two tabs with the inside
grooves of the power cleaner. Once aligned, push the
utility brush into the power cleaner, twist clockwise to lock
into place. (Fig. 13).
11
Multi-spray nozzle