sunjoe 24V-PP350-LTE-P1 Manual Del Operador página 9

Wands Assembly
NOTE: The portable power cleaner is equipped with two
wands: the spray wand and the extension wand. To connect
the wands, follow the instruction below.
1. First, fit the extension wand into the gun firmly by aligning
the two tabs on the wand with the grooves in the gun,
and rotate it clockwise until the two parts are completely
locked (Fig. 3).
Fig. 3
2. Attach the spray wand into the extension wand by the
same method (Fig. 4).
Fig. 4
Extension wand
Spray wand
Extension wand
Tab
Connect to Water Source
The power cleaner can be connected with spigot by a regular
garden hose with the included garden hose adapter, and
can be connected with fresh water or bucket water with the
included siphon hose.
m
CAUTION!
The power cleaner must only be used with
clean (fresh) water; use of unfiltered water containing corrosive
chemicals will damage the power cleaner.
m
WARNING!
When connecting with fresh water (lake,
spring, pond) make sure to use the equipped siphon hose.
The siphon hose has a filter on the end, which will filter out dirt
from fresh water sources.
m
WARNING!
The intake water temperature must not
exceed 104ºF/40ºC.
To connect with fresh water/bucket water
1. To connect the equipped siphon hose with the power
cleaner, pull down the collar of the quick connector and
fit it onto the adapter. Release the collar to lock the hose
in place (Fig. 5).
Fig. 5
Hose adapter
Collar
NOTE: Make sure the hose is connected securely. Gently
pull the hose connection to confirm it won't come off.
2. Drop the other end with the filter into a bucket of water or
into fresh water. Adjust the floater's position up or down
as needed to ensure the filter remains submerged below
the surface of the water.
To connect with spigot
1. First, connect the power cleaner with the provided garden
hose adapter. Pull down the collar of the garden hose
adapter and fit it onto the siphon hose adapter. Release
the collar to lock the adapter in place. Then connect the
garden hose to the garden hose adapter. Twist tightly to
secure (Fig. 6).
9