DAY Useful Everyday 72443 Manual De Instrucciones página 35

Troubleshooting
Problem
The temperature is too high
or too low.
Leakage or no steam.
No steam is coming out for
the steam shot or vertical
steam shot.
Water drips from the
soleplate.
Not enoughsteam is
coming out for the steam
shot.
The spray function is not
working.
Possible cause
The temperature control is
incorrectly set.
The steam iron is not
plugged in.
The temperature control is
set too low.
The steam shot function
has been used too many
times without an adequate
pause between each shot.
The temperature control is
set too low.
The steam iron is not hot
enough.
There is too much water in
the water reservoir.
Check that the steam
button is set correctly.
The steam holes are
clogged.
There is too little water in
the water reservoir.
The pressure is too low.
There is air in the system.
Solution
Check the setting of the
temperature control.
Plug the steam iron in.
Drej Turn the temperature
control to the MAX setting.
Allow the steam iron to reach
maximum temperature before
continuing.
Turn the temperature control
to the MAX setting.
Do not open the steam button
until the indicator light has
gone out.
Pour the excess water out.
Set the steam button to the
desired position.
Carefully clean the steam holes
with a wooden toothpick.
Re� ll with water.
Put your � nger on the spray
nozzle and pump several times
by pressing the spray button.
GB
35