Complete The Installation - KALLISTA P29527-00-NA Instrucciones De Instalación

2. Complete the Installation

Direction of Water Flow
Install with arrow pointing
in direction of water flow.
Mixed Water Supply Line
NOTE: The valve is marked with an arrow to identify the required water flow
direction.
Flush the mixed water supply line to remove any debris.
Use thread sealant and connect the mixed water supply line to the valve inlet port.
Connect the water outlet line to the valve.
Secure the water supply tubing to the support framing.
Secure the valve with screws as shown.
Turn ON the water supply to the valve.
Check all connections for leaks, and make adjustments as needed.
Turn OFF the water.
IMPORTANT! The finished wall surface should not extend beyond the installed
plaster guard.
Complete the finished wall.
Remove and discard the plaster guard.
Install the trim according to the instructions provided with the trim.
Kallista
Inlet
5
Water Outlet Line
Screw (not provided)
1491215-2-A