Installation Environment; Camera Description - TruVision M Serie Guia De Instalacion

EN

Installation environment

When installing your product, consider these factors:
• Electrical: Install electrical wiring carefully. It should be done by
qualified service personnel. Always use a proper PoE switch, a
12 VDC UL listed Class 2, or CE certified power supply to power
the camera. Do not overload the power cord or adapter.
• Ventilation: Ensure that the location planned for the installation of
the camera is well ventilated.
• Temperature: Do not operate the camera beyond the specified
temperature, humidity or power source ratings. The operating
temperature of the indoor camera is between -30 °C to +60 °C.
Humidity is 95% or less (non-condensing).
• Servicing: Do not attempt to service this camera yourself. Any
attempt to dismantle or remove the covers from this product will
invalidate the warranty and may also result in serious injury. Refer
all servicing to qualified service personnel.
• Moisture: Do not expose the camera to rain or moisture, or try
not to operate it in wet areas. Turn the power off immediately if
the camera is wet and ask a qualified service person for servicing.
Moisture can damage the camera and also create the danger of
electric shock.

Camera description

See Figure 2 on page 7.
1. Alarm cable
2. Audio cable
3. Power cable
4. Network cable
5. Reset button
EN–12