universalblue UBH-2300-21 Manual De Instrucciones página 67

To set the pyrolytic cleaning function;
1. Turn commutator to lower and upper heating position.
7. Push
should be written on the screen.
8. After
9. When
10. After 10 seconds, selected pyro mode's time is written on the
screen.
11. 10 seconds later, oven door is locked automatically and oven
starts pyrolitic mode.
WARNING: When pyrolytic cleaning function is wanted to be
started, the oven door should be closed. If the oven door is open,
this is shown as a warning on the screen
WARNING: Whenever pyrolytic cleaning function is started,
oven door is locked automatically.
WARNING: During activating pyro mode, if oven door is open,
it will write a warning message
will not start before door is closed.
WARNING: When pyrolytic cleaning function is completed,
oven door is kept locked until oven inside temperature goes down to
the safe temperature.
WARNING: Cooking area is heated too much during pyrolytic
and buttons at same time for 3 seconds.
is written on the screen, press
or press for mode
or
.
mode selected, wait 10 seconds.
on the screen and pyro mode
for mode
67