Bass Control; Mute Function - Sangean DMS-37BT Manual De Instrucciones

Bass control

5. Press the Equalizer button to cycle through the modes until "Bass" appears on the upper line
of the text display. The current bass setting will be shown on the lower line.
6. To adjust the bass setting press and release the Tuning Up or Down buttons until the desired
level is displayed.
7. Press the Select button to revert to the play mode display. To quickly cancel the effect of the
treble or bass settings press the Equalizer button until "Flat" appears on the upper line of the
text display. The treble and bass settings will be remembered for the next time that you wish to
adjust them.

Mute function

Pressing the Mute button will mute the output from the loudspeakers.
. Press the Mute button to mute the sound output. The speaker volume symbol on the display
will disappear.
2. Press the Mute button again or one of the Volume buttons to un-mute the sound output.
GB
48