Mantenimiento Del Producto; Gestión De Residuos De Envases Y De Productos - Solera R24R/3 Instrucciones De Uso Y Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7

Mantenimiento del producto:

-Limpiar con un trapo seco.
9
Gestión de residuos de envases y de productos:
MATERIAL
DEPOSITAR EN
CONTENEDOR
PLÁSTICO
AMARILLO
PAPEL Y
CONTENEDOR
AZUL
CARTÓN
NOTA: El color de los contenedores puede variar en función del pais donde se aplique. Consulte la normativa local al respecto.
Instructions for use and safety
1
General view:
2
Regulation: -Meets UNE EN 62053-21 regulations- Follow instructions to compliance with the R.D. 842/2002. - Installation,
service and maintenance of the electrical equipment may be carried out by anauthorized person only.Controls the automatic
opening and closing of a circuit according to a time schedule, stored in memory and established by the user. Work with
reserve to avoid deprogramming with power outages.
3
Description and
components:-Mounting DIN RAIL 35mm. -Screw connections. -Analogue programming. -Dimensions.
-Current. -Frequency. -Type. -Load.
-Voltage. -Load.
4
Connection:
5
Instructions:
The quartz movement starts automatically aftera few minutes by an appliedvoltage.The full power reserveis built up after
about +6 days (150h)
A-Put the clock in hour
B-24h Programm
C-Manual
Tum the axis ①in direction of arrow by one notch, ON= or OFF= .The manual control is automatically annuled by the
following counteracting command of the automatic program sequence.
D-Permanent ON/OFF
Set the hand lever al to>> Perm<<= permanent control ;turning the control axis CD in direction of arrow, the required,
permanent control ON or OFF can now be adjusted. Tuming the hand lever to>> Auto<<=Automatic Control, the permanent
control is terminated, The actual switch position is maintained until the next counteracting command ofthe automatic program
sequence is triggered. An immediate correction can be carried out by means of the manual control (override control).
6
Technical information:
7
Product maintenance:
8
Safety and usage tips.
9
Management of packaging and product waste: PACKAGING WASTE; MATERIAL; PLASTIC; PAPER AND PAPERBOARD
; DEPOSIT IN; YELLOW CONTAINER; BLUE CONTAINER; LOGO IN SPAIN (NOTE); INTERNATIONAL LOGO (NOTE);
LOGO IN FRANCE (NOTE); PRODUCT WASTE; WASTE; WEEE; DEPOSIT IN; SELLING POINT; LOGO (NOTE).
NOTE: The color of the containers may vary depending on the country where it is applied. Check local regulations on this.
RESIDUOS DE ENVASE
LOGOTIPO EN
LOGOTIPO
ESPAÑA
INTERNACIONAL
-GWT 850ºC.
-Clean with a dry cloth.
8
RESIDUOS DE PRODUCTOS
LOGOTIPO EN
RESIDUOS
FRANCIA
RAEE
Halogen Free
-3-
Consejos generales
de seguridad y uso.
DEPOSITAR EN
LOGOTIPO
PUNTO DE
VENTA
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido