Infiniton DHM-10L Manual De Instrucciones página 12

DEHUMIDIFIER STORAGE
If the dehumidifier will not be used for an extended period of time:
1. Drain the water tank completely and make sure there is no more water
stocked inside.
2. Unplug the unit and fold up the power supply cord.
3. Remove and clean the air filter, allow it to dry completely and reinstall it.
Store the dehumidifier in a cool, dry loca on, away from direct sunlight,
extreme temperature and excessive dust.
Troubles
Device doesn't work
Dehumidifying
doesn't work
No outlet air
Too loud noise
Water leakage
Frosted evaporator
Possible reasons
Is the power plug con-
nected?
Is the water tank full?
Is the water tank put in
the correct position?
Operation temperature is
too low or too high.
Operation temperature or
humidity is too low.
Is air outlet or air inlet
blocked?
Is filter blocked?
Is the device tilted or not
stable?
Is air filter blocked?
There is sound of water
flow.
Drainage pipe is not
tightly connected.
Pipe is blocked.
Operation temperature
is low; the device is in
defrosting mode.
ENGLISH
Resolution
Put the plug in the
socket.
Pour away the water
from the water-tank and
then put the tank into
the unit.
Operation temperature
range is 5-35℃.
In dry season, the
dehumidifying effect will
not be so obvious.
Clean the air outlet or
air inlet.
Clean the filters.
Put the device in a flat
floor.
Clean the filters.
It is not a defect; it is
the refrigerant flowing in
the device.
Check the drainage
pipe.
Clean the debris in
pipe.
The device has self-
defrosting function.
After defrosting,the
device will work.