After Use - ALFA babycare bbrobot Manual De Instrucciones

AFTER USE

• Never leave water in the reservoir, throw the remaining water out after each use, always waiting until
the robot has cooled down.
• Be very careful: any hot part/accessory, must only be handled when it has cooled down,
or should be picked up by its respective handle.
• Always disconnect the machine before filling it or before any operation that uses the blade and
always after each use.
• Do not unplug the machine by pulling on the cable.
CLEANING
• Separate the parts to be cleaned from each other.
• Do not use abrasive cleaning products.
Base
Unplug the base from the power outlet before cleaning.
Never immerse the base in water or any other liquid, or place it inthe dishwasher.
Clean the appliance only with a damp cloth.
Regularly descale the reservoir. Depending on the quality of the water used, over time a build up of
limescale in the lower part of the reservoir may occur. It is important to regularly descale by using a
mixture of 100 ml of hot water + 100 ml of white vinegar. Let the mixture sit for approximately
30 minutes before emptying the reservoir and drying it with a damp cloth
Jug, Basket and other plastic parts
Clean by hand with a normal dishwashing detergent (not abrasive detergents).
Rinse using plenty of water.
Before cleaning the jug, it is recommended to carefully remove the blades.
EN
83