Adjusting The Belt - Teamtex OXALIS Manual De Instrucciones

Adjusting the belt

• To loosen the belt, press the belt adjustment but-
ton at the front of the seat with one hand.
• Use your other hand to hold the belt lock with the
belts and loosen it.
• If your child is fastened in, pull on the front adjust-
ment tab to tighten the belt.
Please always ensure that the belts are adjusted in
such a way that they rest on the child's shoulders.
Opening/closing the belt
• To release the belt, press the red button on the
belt lock and separate the two belt tongues.
• To close the belt, first pull together the two belt
tongues and slide these into the belt lock together.
Adjusting the head support
• Loosen the belt and pull the lever at the back of
the headrest until the headrest is at the desired
height.
• Release the lever and ensure that the headrest is
locked in place.
- 19 -
EN