Turning On The Appliance - ARIETE 2836 Manual Del Usuario

Warning
For long-lasting sanitation, it is recommended to protect the product support surface to avoid contact with
condensation that may form during the cycle.

Turning on the appliance

The display (F) will show two lines indicating that the appliance is in stand-by mode.
display.
sanitation mode.
During operation, the display shows the current temperature and humidity level.
Immediately after turning on and setting the appliance, leave the room for the entire duration of the
sanitation cycle.
Do not stay in the room during the sanitation cycle.
When the tank runs out of water, the display shows the low water indicator light
sound signal and automatically stops working.
When the low water indicator light (J) turns on, there are still about 100-130 ml of sanitizing solution
in the base that can be used for another cycle within 5-7 days (active product).
Warning
Warning - Risk of material damage
Do not use the product without water and without the solution in the tank when in sanitation mode.
After the sanitation process, open doors and/or windows to ventilate the room before entering the
room again.
off. The other functions will keep normal operation.
"IONIZATION" function
some negative ion particles that, once dispersed into the air, bind to dust particles. In this way, dust particles
settle without being dispersed in air, thus eliminating the risk of inhalation. This function is ideal for people with
breathing problems caused by allergies or asthma.
-
17