auna SELECT Unison Retrospective Manual De Instrucciones página 54

EN
Manual time setting
If you have selected "No Update", the network wizard will request you to
enter the time and date manually. The date and time are displayed as DD-
MM-YYYY and hh:mm AM/PM. The first value "DD" is active (flashing). Adjust
each value with the rotary control and confirm your selection by pressing
the rotary control. As soon as a value has been confirmed, the next value is
activated and can be set.
Network
The device is compatible with all conventional network protocols and
encryption methods, including WLAN protected setting (WPS). In order
for your device to connect to a network, a WLAN router is required and, if
applicable, a password (if set). Select WLAN region/country > WiFi network
(SSID) and then select the desired network from the list.
If a network is open (unencrypted), the device connects to the network and
no further input is required.
Standard encrypted network
To enter the password, turn the Rotary encoder to select the letters/
numbers and press the Rotary encoder to confirm each letter/number. Your
entry is displayed at the top of the screen under "Key".
The input screen also has the options "BKSP" (back), OK, and CANCEL.
These can also be accessed with the rotary control. Pressing the INFO
button directly selects the "BKSP" option.
54