Cleaning The Inlet Filter - Infiniton WM-62P Manual De Usuario

MAINTENANCE

Cleaning the Inlet Filter

Note!
• Diminishing water flow is a sign that the filter need to be cleaned.
1. Close the tap and remove the water supply
hose from it.
2. Clean the filter with a brush.
3. Unscrew the water supply hose from the
backside of the machine. Pull out the filter
with long nose pliers.
4. Use a brush to clean the filter.
5. Reinstall the filter to the water inlet and
reconnect the water supply hose.
Clean the Inlet filter every 3 months
6.
to ensure the normal operation of the
appliance.
Clean The Detergent Dispenser
1. Press down the release [
drawer out of the recess. Clean the inside of the recess with a brush.
2. Lift the softener cover off the dispenser drawer and wash both items with water.
3. Restore the softener cover and push the drawer back into the recess.
1
Press the release and
remove the dispenser
drawer
Note!
• Do not use abrasive or caustic agents to clean plastic parts.
• Clean the detergent dispenser every 3 months to ensure the normal operation of the
appliance.
] on the softener cover and pull the dispenser
2
Clean the dispenser
drawer and the softener
cover under water
27
1
3
3
Clean the recess with
an soft brush
2
4
4
Insert the dispenser
drawer