Kichler HOLMDEN 39543 Instrucciones De Ensamblaje página 4

ASSEMBLY INSTRUCTIONS
1. Insert long machine screws (DD) through
mounting bracket (B) so the long machine
screws (DD) protrude outward. Orient the
mounting bracket (B) so the raised center
portion protrudes into the outlet box (not
included). Connect the mounting bracket (B) to
the outlet box with short machine screws (BB).
Hardware Used
Short Machine
BB
Screw
Long Machine
DD
Screw
2. Wire connection guide:
Ground wire:
• For installation in the United States: Wrap
ground wire from outlet box around ground
screw on mounting bracket (B) no less than 2
in. from wire end. Tighten ground screw. If
fixture is supplied with a ground wire, connect
to outlet ground wire with a wire connector
(AA).
• For installation in Canada: If fixture is supplied
with ground wire, wrap ground wire around
ground screw on mounting bracket (B).
Tighten ground screw. Connect fixture ground
wire to outlet ground wire with a wire
connector (AA).
Supply wires:
• Connect the Neutral (White) supply wire from
the outlet box to the Neutral fixture wire (White
or Parallel Cord "D" shaped and ribbed).
• Connect the Hot (Black) supply wire from the
outlet box to the Hot fixture wire (Black or
Parallel Cord round and smooth).
NOTE:
Fixture wires will either be:
• Black and White.
• Parallel Cord SPT-1 lamp wire with one
round smooth wire and one "D" shaped
ribbed wire.
Hardware Used
Wire Connector
AA
1
x 2
x 2
2
BARE COPPER,
OR GREEN
GROUND
SUPPLY WIRE
BLACK SUPPLY
WIRE
WHITE SUPPLY
WIRE
BLACK SUPPLY
WIRE
WHITE SUPPLY
WIRE
x 3
4
Outlet Box
BB
B
DD
BARE COPPER,
AA
OR GREEN
GROUND
FIXTURE
WIRE
BLACK FIXTURE
WIRE
WHITE FIXTURE
WIRE
OR
PARALLEL
FIXTURE CORD
(ROUND AND
SMOOTH)
PARALLEL FIXTURE
CORD ("D" SHAPED
AND RIDGED
)