Tineco iFLOOR BREEZE Manual De Uso página 32

Filter & Floater
If the filter and the floater have been blocked, rinse with water.
Remove the filter from the tank lid, remove the floater, and rinse both parts with water.
Filter
Grasp recessed area on each side of the filter and pull upward. Rinse under running water and must be
completely dry before recombining with the lid of the DWT.
*A spare sponge is provided with your appliance for convenient replacement.
Self-cleaning
1. Place the appliance on the storage tray and plug in.
Press and hold
process.
2. Once complete, the appliance will begin charging.
Clean the Dirty Water Tank after cleaning completed.
Note:
• Ensure the appliance is plugged in.
• Before self-cleaning cycle, please clean the DWT and
ensure the water level in the CWT exceeds 40%.
30
for 3s and begin the self-cleaning