Tineco PURE ONE X Serie Manual De Uso página 40

Pre-filter
Ensure the appliance is switched off before
cleaning, and remove the dirty pre-filter from
the mesh filter-holder.
Replace a clean filter to the main body. Put
the dirty pre-filter into the cleaning tool and
connect the cleaning tool to the main body.
HEPA Filter
Turn the HEPA to the left and gently pull out
for cleaning. Do not use the appliance without
first installing the HEPA filter.
Do not turn the appliance upside down when
removing or installing the filter to prevent dust
from entering the motor.
Run the appliance in MAX mode, and rotate the
side cover to clean the dirty pre-filter.
Do not place the appliance as above when
removing or installing the HEPA filter, to prevent
dust from entering the motor.
38