Snapper XD SXD2BL82K Manual Del Propietário página 12

ASSEMBLY
ASSEMBLING THE BLOWER TUBE (See Figure 2.)
W A R N I N G
To prevent accidental starting that could cause serious personal injury, always
remove the battery pack from the tool when assembling parts.
1. Align groove on the blower tube with the tube release button.
2. Move the tube until the tube release button engages into the groove.
3. Connect the nozzle to the blower tube until the latch on the tube engages
into the opening on the nozzle.
Nozzle
Tube release
Blower
button
tube
12
Fig. 2