Snapper XD SXD2BL82K Manual Del Propietário página 14

OPERATION
Trigger
ADJUST THE ARM STRAP (See Figure 4.)
1. Attach the strap to the machine.
2. To release the strap, press down the release buttons on both sides and
pull backwards on strap.
3. You can tighten the arm strap in two ways:
• Pull the strap directly to adjust the strap rapidly.
• Pull the tab until you hear a "click". Keep pulling the tab until the arm
strap fits snuggly.
STARTING / STOPPING THE BLOWER (See Figure 4.)
1. Install the arm strap.
2. Squeeze the trigger to start the blower.
3. Release the trigger to stop.
Arm
strap
14
Tab
Release button
Fig. 4