INSTALLING THE CAR SEAT IN THE VEHICLE
Group 0+ (0-13 kg, from birth up to about 15 months) - installation in the rearfacing
position
Installation only on vehicles equipped with an ISOFIX anchoring system and Top Tether
attachment.
⚠DO NOT install the car seat on the passenger seat with an active airbag: this can
cause SERIOUS, OR EVEN FATAL, INJURY.
NOTES: The car seat is approved for use in the rear-facing position with children up
to 18 kg in weight. It is recommended to use the rear-facing position for as long as
possible, even when the child's weight is between 9 kg and 18 kg (Group 1), as long as
the child's height allows.
• ENGLISH •
B1
B1
Press both sides of the adjustment/release button
on the ISOFIX connectors simultaneously and
extend the ISOFIX connectors.
B2
Locate the ISOFIX attachments supplied with the
B2
vehicle (B2). Press both sides of the adjustment/
release
simultaneously and extend the ISOFIX connectors.
B3
B3
PUSH
PU SH
and press until you hear a "click". The indicator on
both brackets will turn green, confirming that they
have attached. Ensure that
button
on
the
61
D
D
ISOFIX
connectors
Align the ISOFIX
connectors with
the
anchoring
points
to the vehicle
passenger
fixed
seat