INSTALLING THE CAR SEAT IN THE VEHICLE
Clic k
ATTENTION
Pull the harness adjuster strap towards you, neither
upwards nor downwards.
After adjustment, the loose adjuster strap should be hidden
under the cover.
Precautions to make sure you have correctly fastened the car seat harness
IMPORTANT
For the safety of your child, always make sure that:
• The harness belts are correctly adjusted according to the
child's height, and are correctly tightened;
• The chest straps are adjusted in the correct position;
• The harness belts are not twisted;
• The tabs are properly engaged in the buckle
B11
• ENGLISH •
To attach the buckle: Hold together the central buckle tabs
and insert them in the special slot inside the harness buckle.
A "click" will indicate that it has attached correctly.
NOTE: to attach the buckle, it is necessary to insert both tabs.
To release the buckle: Press the red button to remove the tabs
from the central buckle.
B14
Tightening the harness: Pull the harness adjustment
strap so as to tighten it properly against the body of
the child. The harness is correctly tightened when the
gap between the harness and the child is no greater
than the thickness of your finger (1 cm).
NOTE: check that the buckle is secured by tugging
the shoulder and waist straps.
B15
ATTENTION: Do not twist or overlap the harness
straps.
65
Inclination angle