ATTENTION
Pull the harness adjuster strap towards you, neither
upwards nor downwards.
After adjustment, the loose adjuster strap should be hidden
under the cover.
Precautions to make sure you have correctly fastened the car seat harness
IMPORTANT
For the safety of your child, always make sure that:
• The harness belts are correctly adjusted according to the
child's height, and are correctly tightened;
• The chest straps are adjusted in the correct position;
• The harness belts are not twisted;
• The tabs are properly engaged in the buckle
11
B14
INSTALLING THE CAR SEAT IN THE VEHICLE
Tightening the harness: Pull the harness adjustment
strap so as to tighten it properly against the body of the
child. The harness is correctly tightened when the gap
between the harness and the child is no greater than
the thickness of your finger (1 cm).
NOTE: check that the buckle is secured by tugging the
shoulder and waist straps.
B15
ATTENTION: Do not twist or overlap the harness
straps.
Dopo la regolazione, la cinghia di regolazione libera
deve essere nascosta sotto la fodera.
B13
C13
IMPORTANT: Before starting the engine make sure
that the seat is locked in the facing position.
Do not place the car seat in the forward-facing
position if the child weighs less than 9 kg.
• ENGLISH •
LOCK
71
Inclination angle
Rotate the seat into the
facing position, a "click" will
indicate that it is locked.
Make sure that the button is
in the "locked" position.