essentiel b ELF914-1b Instrucciones De Uso página 56

INFORMATION
• Keep the safety screws carefully in case you need to transport the washing
machine at a later date.
• Fit the transport safety bolts in the reverse order to the disassembly
procedure.
• Never move the appliance unless the transport safety screws are securely
fastened!
Water inlet connection
INFORMATION
• The water pressure required at the inlet to operate the machine must be
between 1 and 10 bar (0.1 - 1 MPa). It is necessary to have 10 - 80 litres
of water in one minute with the tap wide open, so that your machine runs
smoothly. Attach a pressure reducer if the water pressure is higher.
WARNING!
• Single water inlet models must not be connected to the hot water tap. This
type of connection would damage the laundry or the product would go into
safe mode and would not work.
• Do not use old water inlet hoses on your new product. They could stain
your laundry.
1. Tighten the nuts of the hose by hand. Never use a tool to tighten these nuts.
56