Opening the loading door after a power failure:
INFORMATION
•
In the event of a power failure, you can open the loading door manually
using the emergency handle located next to the pump filter.
WARNING
•
Before opening the door, make sure there is no water left inside the machine
to prevent overflow.
•
Turn off and unplug the washing machine.
•
Open the cover of the pump filter.
•
Remove the emergency handle from the loading door behind the cover of the filter
with a tool.
•
Open the loading door by pulling the emergency handle on the loading door
downwards.
•
Try pulling the handle down again if the loading door is not open.
•
Return the emergency handle on the loading door to its original position after opening
the loading door.
82