Laundry doesn't smell like fabric softener. (**)
•
The washing product was placed in the wrong compartment. >>> If washing product
is introduced into the prewash compartment on a non-prewash cycle, the machine
may introduce this washing product during the rinse or softener phase. Wash and
clean the dispenser drawer with hot water. Put the washing product in the appropriate
compartment.
•
The washing product may have been mixed with the fabric softener. >>> Avoid mixing
fabric softener with washing product. Wash and clean the dispenser drawer with hot
water.
Washing product residue in the dispenser drawer. (**)
•
The washing product was poured into the dispenser drawer when it was wet. >>> Dry
the dispenser drawer before adding the washing product.
•
The washing product is wet. >>> Keep washing products closed in a moisture-free
environment and avoid exposing them to excessive temperatures.
•
Water pressure is low. >>> Check the water pressure.
•
The washing product in the main wash compartment became wet when the prewash
water was added. The washing product compartment openings are blocked. >>>
Check the holes and clean them if they are clogged.
•
There is a problem with the valves of the dispenser drawer. >>> Contact an authorised
service agent.
•
The washing product may have been mixed with the fabric softener. >>> Avoid mixing
fabric softener with washing product. Wash and clean the dispenser drawer with hot
water.
•
The drum is not cleaned regularly. >>> Clean the drum regularly. Please refer to the
corresponding chapter.
An excessive amount of foam forms in the machine. (**)
•
An unsuitable washing product for the washing machine is being used. >>> Use a
washing product suitable for the machine and the type of laundry.
•
There is too much washing product. >>> Use only a sufficient amount of washing
product.
•
The washing product was not stored under the right conditions. >>> Store your
washing product in a fresh and dry place. Do not store in excessively hot places.
•
Some cloths, such as netting (tulle), etc. generate a lot of foam because of their mesh
structure. >>> Use small amounts of washing product for this type of items.
•
The washing product was placed in the wrong compartment. >>> Put the washing
product in the appropriate compartment.
•
The softener is being withdrawn early. >>> There may be a problem with the valves or
the dispenser drawer. Contact the authorised service agent.
Foam overflows from the dispenser drawer.
•
Too much washing product has been used. >>> Mix 1 tablespoon of softener in ½
93