Installation; Operation; Installing The Access Module; Installing The Mobile App And Creating An Account - THOMSON 520014 Manual Del Usuario

1 - OPERATION

Ideally placed behind a switch, this micro module
allows you to remotely operate your roller blinds
and shutters. You can thus operate your window
coverings locally using the original switch or
remotely using your smartphone and the Thomson
At Home app.
Note that this connected module is compatible with
all 2.4GHz routers.

2 - INSTALLING THE ACCESS MODULE

IMPORTANT: Before permanently attaching your
accessory, it is recommended that you check the
range. To do so, place your micro module as close
as possible to its fi nal location before you attach it
and test your accessory.
The micro module can be installed either behind an
existing switch or behind a ceiling fi xture.
Switch
1
2
3
Mains Motor
Lowering phase
M
Raising phase
WIFI CONTROL MODULE FOR ROLLER SHUTTERS AND BLINDS
230VAC 50Hz power supply
After the electrical supply has been disconnected,
disconnect the existing wall switch. Connect the
module according to the assembly plan.
Do not connect S and S to the mains, they must
be connected to the switch.
3 - INSTALLING THE MOBILE APP AND
CREATING AN ACCOUNT
After installing the module, follow the instructions
below to pair it.
Download the Thomson At Home app from the
Android Play Store or Apple store
Launch the app and log in if you already have an
account. If not, press
REGISTER and follow the app guide
Once you have entered your email address and
password, you will receive a confi rmation code in
your inbox. Enter this code to fi nalise registration.
Note that this email may go into your spam folder.
N
P
C - INSTALLATION
At Home
7
EN