Assembly And Operation Instructions - Greenlee 881 Manual De Instrucciones

Assembly and Operation Instructions

881 and 881CT—Floor Operation (refer to "Identification—Major Components")
1. Lay out the connecting bars (C), roller unit (D), and
two hitch pin clips (E).
Connecting Bar
with Bending
Instructions
Decals
2. Attach the roller unit to one of the connecting bars
with a hitch pin clip, as shown.
Decals face
outward
3. Repeat Step 2 for the other connecting bar.
Greenlee Tools, Inc.
881 and 881CT Hydraulic Benders
4. Position the ram and cylinder block so that, from the
operator's point of view, the ram scale is up and to
the left of the ram.
5. Attach the yoke (B) to the ram with the spring clip (H).
6
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Ram
Travel
Scale