Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MKS185Ec
5
Operation
5.1 Startup
These operating instructions must be brought to the attention of all persons entrusted with the operation of the
machine, with particular emphasis on the chapter "Safety instructions".
5.2 Switching on
Use the following procedure to switch on the
machine:
1.
Press the switch-on lock (6) forward to unlock.
2.
With the switch-on lock depressed, actuate
and hold the operating lever (8).
The machine starts up.
➢
3.
Release the switch-on lock (6).
The machine is switched on.
✓
Since the switch is not latching, the machine runs only as long as the operating lever is
pressed.
When the machine is switched on, the integrated electronics ensure jerk-free
acceleration and, under load, readjust the speed to the fixed set value.
In addition, these electronics regulate the motor back in case of overload, i.e. the saw
blade is stopped.
01/2022
Fig. 13: Switching the machine on
19
Publicidad
Tabla de contenido
