RIDGID R4093 Manual Del Operador página 15

ASSEMBLY
INSTALLING MOTOR HEAD AND BASE TO
WATER TRAY
See Figure 20.
 Attach the water hose to the pump elbow.
 Rest pump power cord and water hose in the notches
provided on the water tray.
 Carefully lift the motor head and base assembly over the
water tray, as shown.
RUBBER
BOOT
PUMP ELBOW
WATER HOSE
PUMP
POWER
CORD
HEAVY
DUTY TAB
WATER
TRAY
 Tilt the base and insert heavy duty tab into the bar slot
on water tray.
 Secure the base in place with latches on front of the water
tray.
 Connect the pump power cord to the motor head power
cord. Check that the rubber boot is pulled over cord
connection to help keep water off the plug.
MOTOR HEAD
AND BASE
ASSEMBLY
BAR
SLOT
15 — English
HEAVY DUTY
TAB
BAR SLOT
LATCHES
Fig. 20