Tineco CARPET ONE PRO Serie Manual De Uso página 15

Ocultar thumbs Ver también para CARPET ONE PRO Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Stop Working
In AUTO/MAX/DRY mode, the appliance will
stop working when put uprightly and start
running again when you recline.
Note:
• The carpet cleaner differs from the traditional vacuum cleaner.
• In all modes, it blows hot air, whose temperature is 158-176°F (70-80°C).
* Appropriate temperature is conducive to dissolve the dirt and helps surfactant in the solution to decompose the dirt.
• In AUTO/MAX mode, it sprays water when moving forward and stops spraying when moving backward.
• Take a spot test on a small and marginal area of the carpet for colorfastness. Gently rub surface
with a damp white cloth. Then wait ten minutes and check for color removal or bleed with a white
paper towel.
• During use, don't keep the appliance at a resting position for a long time.
Preparing for Use (Accessory Hose & 2 in 1 Nozzle)
Attach the accessory hose, stand the appliance
upright and ensure that it is power on (if not,
press the
button), the appliance will enter
in ACCESSORY mode, the appliance will stop
working when you recline.
Note:
Do not vacuum foamed liquid.
Grip the back carry handle to lift or move
appliance. Empty CWT and DWT after each
use.
Store the accessories in the bag after use.
13
Do not grip DWT handle to
lift or move the appliance.

Publicidad

Tabla de contenido
loading

Tabla de contenido