Mainstays GSB3321019-3 Instrucciones De Montaje página 14

ASSEMBLY
9
1. Align the corresponding hole of the MIDDLE BAR ( E ) as figure shown below.
2. Align the corresponding hole of the MIDDLE BAR ( E ) and BACK PANEL ( D ) into
the corresponding hole of SIDE PANEL ( C ) as figure shown below .
3. Insert the CAM LOCK ( 2 ) into the corresponding hole ( the direction of the notch is
aligned with the cam bolt as the figure shown below).
Use a hand screwdriver to turn the CAM LOCK ( 2 ) clockwise to secure the cam bolt.
4.
Make sure edge of both panel
align and even
CAM LOCK
2
×7
Please call for replacement parts or assistance: 1-888-568-3818
Young Chain Company Limited
The direction of the
notch of the cam
lock is aligned with
the cam bolt.
Page 14