Mainstays GSB332197-2 Instrucciones De Montaje página 12

ASSEMBLY
7
1. Align the corresponding hole of the MIDDLE BAR ( G ) and PARTITION ( E ) as figure
shown below.
2. Align the corresponding hole of the MIDDLE BAR ( G ) and BACK PANEL ( F ) into
the corresponding holes of PARTITION ( E ) as figure shown below.
3. Insert the CAM LOCK ( 2 ) into the corresponding hole ( the direction of the notch is
aligned with the cam bolt as the figure shown below ).
4. Use a hand screwdriver to turn the CAM LOCK ( 2 ) clockwise to secure the cam bolt.
CAM LOCK
2
×7
Please call for replacement parts or assistance: 1-888-568-3818
Young Chain Company Limited
The direction of the
notch of the cam
lock is aligned with
the cam bolt.
2
Make sure edge of both panel
align and even
Page 12