System Features - BMC RESmart GII CPAP System Manual Del Usuario

manufacturer of the equipment or system as replacement parts for internal components, may
result in increased emissions or decreased immunity of the equipment or system.
• When the insulation layer of the SpO
the patient.
• Please contact BMC to buy the SD card if you need it.

10. System Features

Name
Indicate the humidity level. There are five levels in total. The number of
Humidifier indicator lights that light up is directly proportional to the humidity level.
Indicator If none of the indicator lights light up, it means the humidifier is turned
off
Press this button to mute the alert. However, if the problem causing the
Mute Button
alert is not solved, the alert will sound again two minutes later
Knob Start treatment and adjust device settings
Ramp Button Enable the Ramp feature
Display Screen Display menus for operation, messages, monitoring data, etc.
Power
Indicate the power supply status
Indicator
Deliver pressurized air; connected to the tube or the air inlet of the
Air Outlet
humidifier
Humidifier
Provide power to the humidifier which is connected to the main device
Connector
Shield
Connect the humidifier to the main device after this shied is removed
(Optional)
E-20C-H-O / E-20CJ-H-O User Manual V2.3
probe cable is damaged, do not connect the probe to
2
Fig. 10-1
Function
8 / 35